What is the timer/clock part number for the Jenn-Air D120 Range?

Timer part number 715394 for Jenn-Air D120

The D120 Range uses timer part number 715394.

Do you have a failed Jenn-Air D120 control panel? Click here:

We can repair or replace your faulty Jenn-Air D120 timer.

D120 are also sometimes referred to using these Alternative Names/Model numbers

Maytag D120 Range, Whirlpool D120 Range

D120 Schematic and Wiring Diagrams

Basic body Parts diagram

Oven Parts diagram

Blower assembly (plenum) Parts diagram

Top assembly Parts diagram

Control panel Parts diagram

Door assy. (see thru black glass) Parts diagram

Recent Service Requests

City	Problem Description	Resolution
Dixville, Quebec	Timer / Clock motor failure.	Repaired
Smithers, British Columbia	CLOCK NOISY	Repaired
Gastonia, North Carolina	Clock has stopped	Awaiting receipt of timer
Jackson, Tennessee	Timer hums but not work	Awaiting receipt of timer
Cupertino, California	Timer/clock won't run/advance.	Beyond Repair
LAFAYETTE, California	Clock no longer works and time of day numbers have faded out.	Beyond Repair
Lake Forest Park, Washington	Removed dissembled, cleaned, inspected, reassembled, can hear timer motor working yet no clock or timers advance. Can send mine for repair or keep for parts and buy one from you? Please advise	Awaiting receipt of timer
Kitimat, British Columbia	Clock and timers don't work.	Repaired
Colorado Springs, Colorado	The timer worked fine until recently, but was making a loud "ticka-ticka-ticka" sound. I tried removing it and lubricating the gearbox in the hope of quieting it, but then it stopped running entirely. I can still turn the gears using the knobs on the front panel and by manually rotating the motor's rotor, so I'm guessing that the motor has died. It is also possible that I used the wrong lubricant (lithium grease) and gummed up the gearbox to the point where the motor can't produce enough torque to turn the gears anymore.	Repaired
Portage la Prairie, Manitoba	Quit working... Motor open circuit???	Repaired
La Pine, Oregon	Motor stops clock gears worn out	Awaiting receipt of timer
STROUDSBURG, Pennsylvania	POSTS HOLDING KNOB BROKEN OFF	Awaiting receipt of timer
San Francisco, California	Clock does not run.	Awaiting receipt of timer
Bandon, Oregon	noisy clock motor... oven timer may/may not work.	Repaired
La Pine, Oregon	Motor stops clock gears worn out	Awaiting receipt of timer

Common problems for Jenn-Air D120 Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your D120 timer-related problem.

I have a Jenn Air down draft range/oven model D120 that the electric clock motor has quit running. Since this is no longer available anywhere, is there a way to convert it to an electronic clock? Every thing else works fine on the oven. Roger Fort Dodge, IA

I have a Jenn Air D120 range. It still works great but the clock PS 786641 has stopped working and the replacement parts list says it is NLA No Longer Available. Any recommendations for locating a replacement? Thank you XXXXX

I have a 20 yr old Jenn Air D120 that suddenly doesn't heat. Fan and signal lights work. We have several plug in cook tops, none of which heat. The oven doesn't heat although the top burner does seem to get a little warm. I've seen other posts that suggest maybe there is a master thermostat that could have kicked off. Can't find it.

have jenn air model D120, Serial 37252915 electric oven, 30 inch with convected oven and down draft. problem is that the right side of oven will not heat the elements, but if this element or module is moved to the left side it works. is it possible for both switches to go out at the same time? what parts do I need to fix this and also the blower switch on top front? John Rungy XXXXX@XXXXXX.XXX

try to get my service light to come off my d120 lawn tractor i changed the oil but i cant get the thing to stop flashing

I have a Jenn Air oven/oven Model number D120 Serial 37274855 it is down draft drop in 24 inches in height 24 in depth and 30 inches across the top. I have two questions. Does Jenn Air still make a drop in of only 24 inches high? I have not been able to find one. Second is an element available for a oven that old? THank you for you time. Joy Hughes

we have a jenn air model d120, clock is broken and discontinued part 715394 everything else works fine but without clock cannot clean oven. will any other clock work?

My marine volvo penta d120 (shaft drive) when running sends the rev counter off the scale (despite actual low revs. What could cause this and should I be concerned?

I have just changed all the ink's in an Epson d120 I have just change all int ink's in an Epson d120 but it says the blacks are empty..they are not!

Epson D120 printer carriage goes to the left and stays there. Epson D120 printer. Carriage travels to the left and makes a grating noise as if the drive belt is slipping. Then boyh ooven lights come on but printer is now locked and will only do anything if it is turned off and on again. Then the same thing happens again.I have another Epson stylus which does exactly the same. And a third that refuses to accept ink cartridges.I only use the epson D120 becauase I use it for sublimation printing on mugs and cannot find an alternative for sublimation ink. I cannot however afford to keep buying new printers.

print without using two refills? epson d120 My epson d120 has space for 3 colour cartridges and 2 black. I bought an epson multipack, which has only 1 black cartdridge. I changed the 4 cartridges but it still won't print. Is there any way I can print using what I have or do I need to purchase 1 more black cartridge? (if so, why don't epson put 2 black cartridges in their multipack???)

no driver for mustek bluetooth mbt-d120 for Windows 7