 Established in 1969 |
|
Thermador Range RDFS30QW Timer Repair
What is the timer/clock part number for the Thermador RDFS30QW Range?
The RDFS30QW Range uses timer part number 486752.
Do you have a failed Thermador RDFS30QW control panel? Click here:
We can repair or replace your faulty Thermador RDFS30QW timer.
RDFS30QW are also sometimes referred to using these Alternative Names/Model numbers
Bosch RDFS30QW Range
RDFS30QW Schematic and Wiring Diagrams
Gas burner box assembly Parts diagram
Main oven assembly Parts diagram
Cooling and electrical control Parts diagram
Main oven door assembly Parts diagram
Storage drawer and base Parts diagram
Recent Service Requests
| City | Problem Description | Resolution |
|---|---|---|
| Talent, Oregon | Too faded to see well. | Awaiting receipt of timer |
| Vancouver, British Columbia | Button gets stuck - this time trying to press for high temperature in Convection Oven. I have removed the button at this time. The read-out is also very hard to see, and has been for some time! The F1 and F3 have happened several times over the last several months. I turn off the stove at the breaker and it is then able to be used again. However, this time, I removed the "up" button completely. I have really appreciated your explanations! | Repaired |
| Loveland, Colorado | Dim LEDs, can't see numbers. Checking to see if you have a replacement, new or one with LEDs repalced with new LEDs. | Repaired |
| Montreal, Quebec | The clock / timer shows the code F1, and there is an alarm sound emitted every few seconds. As stated in the owner manual, I closed the electricity and restarted it, and gigled all the buttons with no avail. Now, the oven (electric) does not work, but the two standard burners do (but not the 2 XLOs). Everything was working fine before the clock / timer started displaying the F1 code, except for the rather dimmed display. | Awaiting receipt of timer |
| Sudbury, Ontario | error f1 cleared by power off then on. lights dim | Repaired |
| Bellbrook, Ohio | Very dim display | Repaired |
| Burbank, California | The main heating element does not warmup or reach temperature. Possible relay problem in board....for bottom heating element. This has occurred several years ago & it was repaced with a rebuilt board then. The heating element in the bottom of stove is & temperature sensor are 100% functional & new. Please advise if you have a replacement available or.. you dont have item in stock...If I need to send the defective part for repair first. In the past I've returned the defective board after receiving a rebuilt board. | Repaired |
| Mountain View, Missouri | Temperature is erratic. Seems to reach low temps (350 & below) fine. However, when setting board to higher temps, board doesn't want to reach temperature. You can set board to 400 degrees it will get to 360-375. If you set board to 550, control never reaches over 400 degrees. | Replaced with new in-stock timer |
| GARDEN GROVE, California | VERY DIM | Awaiting receipt of timer |
| Fairport, New York | Oven temperature cannot be controlled | Replaced with reconditioned timer |
| Salem, Oregon | Digital numbers of oven temperature are fading and difficult to see. We want to replace the unit with a new unit before it fails completely. | Replaced with reconditioned timer |
| Durham, North Carolina | display is dim. irratic oven temperature | Replaced with new in-stock timer |
| Garden Grove, California | Digital display is very dim. Able to press bake/broil/clean but cannot read the temperature. | Awaiting receipt of timer |
| Nepean, Ontario | LED lights are very dim or not working Require NEW timer. | Replaced with new in-stock timer |
| Butler, Indiana | Board will be mailed from customer K. Swaim. Original diagonsis from CoreCentric Solutions was the "relay board arced to the logic board" beyone drpair. | Replaced with reconditioned timer |
| Nepean, Ontario | Require a repaired/reconditioned serviceable timer | Replaced with new in-stock timer |
| Nepean, Ontario | LED lights are very dim or not working Require NEW timer. | Replaced with new in-stock timer |
| Nepean, Ontario | Require a repaired/reconditioned serviceable timer | Replaced with new in-stock timer |
Repairing, reconditioning and rebuilding appliance timers and stove clocks since 1969. Experts in relay boards, washer timers, dryer timers, timer repair, range timers, dishwasher panels and ERCs. |
| ©2024 ApplianceTimers.com - A unit of Macro Point Ltd. Privacy Policy Site Map v20240510 |