12001618 Jenn-Air/Maytag Range (Oven, Stove) Timer Repair |
Failure codes, problems, and resolutions for Jenn-Air/Maytag timer model # 12001618 |
![Jenn Air ERCs and Jenn Air stove clocks and timers]() ![Maytag ERCs and Maytag stove clocks and timers]() |
Manufacturer : |
Jenn-Air/Maytag |
| Part Number : |
12001618 |
| Appliance Type : |
Range (Oven, Stove) |
| Color : |
Black |
| Description : |
Clock |
|
Do you have a failed Jenn-Air/Maytag 12001618 timer?
Click here:
We can repair or replace your faulty 12001618 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Jenn-Air/Maytag Part Number 12001618| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Missoula, Montana | scg20200w | up arrow button is b | surface is cracked over the up arrow. doesn't work. down arrow and everything else seems to work ok. | Repaired | | Vaughan, Ontario | scg20200w | F3 | when I turn the oven on i get code F3 and F5 the oven then turn off and beeps for a moment i have to repeat the same thing there is problem with. i have replaced the temperature sensor. | Repaired | | NEOLA, Iowa | SCG20200W | N/A | Digital display is dim--can't read numbers | Awaiting receipt of timer | | Abbotsford bc, British Columbia | Scg20200w | N/A | Oven timer just turns off the screen then turns black | Awaiting receipt of timer | | Estevan, Saskatchewan | CHG9830BAE | N/A | Everything works except the backlight went very very dim on me | Awaiting receipt of timer | | Kanata, Ontario | SCG20200B | F3 | Intermittent F3 errors. I have replaced the oven temperature sensor but the problem remains. | Awaiting receipt of timer | | toronto, Ontario | SCG20200B | N/A | Right up down arrow pad top push button dosnt work. everything else works. | Awaiting receipt of timer | | Lexington, Kentucky | SCG20200B | N/A | Up arrow button does not work | Awaiting receipt of timer | | Harvey, Louisiana | scg20200 | N/A | LED display very dim, some cells not illuminated | Awaiting receipt of timer | | Santa Maria, California | ScG20200W | N/A | LED display intermittently stops working; the oven keeps working. | Awaiting receipt of timer | | Saskatoon, Saskatchewan | SCG20200W | N/A | Arrow key for temp is broken | Awaiting receipt of timer | | briercrest, Saskatchewan | | N/A | goes off and on | Awaiting receipt of timer | | Barberton, Ohio | | N/A | No display- Pls. see if you can repair this timer. | Awaiting receipt of timer | | Kirkland, Québec | SCG202000W | not aware | The LED display blacks out and while the oven remains on, we are not able to ascertain which functions have been activated ( ex. Broil/convection etc) or what temperature has been attained. If you apply pressure to the front face of the timer, the LED tuns on intermittently for a short time. ( you will note that this effort has damaged the facade of the timer. | Awaiting receipt of timer | | Cuvler City, California | SCG20200W | N/A | "up" arrow for oven control is non-functional. We can bake at no more than 350 degrees and can only use "low" broil. | Awaiting receipt of timer | | Winchester, Virginia | CHG9830BAE | none | Works intermittently - appears to be problem in the LED display only, because when the display blacks out the oven remains on. Don't know if the controls work to reset temps etc. when blacked out, however. This unit is about 5 yrs. old but does get exposure to some heat, being on the front of the oven over the oven door. | Awaiting receipt of timer |
|
