131725300 Electrolux Laundry Timer Repair |
Failure codes, problems, and resolutions for Electrolux timer model # 131725300 |
|
Manufacturer : |
Electrolux |
Part Number : |
131725300 |
Appliance Type : |
Laundry |
Color : |
|
Description : |
Spin control board |
|
Do you have a failed Electrolux 131725300 timer? Click here: We can repair or replace your faulty 131725300 timer. |
|
Recent Service Requests for Electrolux Part Number 131725300City | Model Number | Failure Code | Problem Description | Resolution |
---|
Lindsay, Ontario | FWT 445 GES2 | NA | No motor movement.
Pump runs
Have replaced lock assembly . Ran for 2 loads and then will not agitate or spin
Previous to replacing door lock machine would agitate but not do high speed spin. | Beyond Repair | Ravenna, Michigan | wsxh208v0ww | N/A | washer timer goes through cycles but motor does not spin always. | Awaiting receipt of timer | Mount Ida, Arkansas | Gallery | N/A | There has been a progression of symptoms, most noticeable in the spin cycle.
1) First, would spin at low and high speed in one direction only (lost the reverse direction spin).
2) then, motor would spin at low speed, with occasional high speed spin (about 1/2 of the time).
3) then, would only spin at low speed. (lost high speed spin), and with weak agitation.
4) now, will not spin at all. I haven't check the agitation at this point.
With no load (belt removed), Motor starts to spin very slowly, and then a 'click' is heard from the board, and the motor stops. after a few seconds, symptoms repeat.
A new motor was installed, but same symptoms. | Awaiting receipt of timer | Williamsburg, Massachusetts | FWT 449GFS1 | no failure code capa | this front load washer doesn't spin or agitate.
The water pump, dispenser pump and mechanical clock timer appear to work. | Awaiting receipt of timer |
|