| Port Moody, British Columbia | PLDB998CC0 | No code displayed | The display flashes on and off rapidly from about 20 minutes into the cycle. The control relays start clicking on and off rapidly, the dishwasher overhears during the dry cycle. | Awaiting receipt of timer |
| Edmonton, Alberta | | Cl | Failed | Awaiting receipt of timer |
| Richmond Hill, Ontario | PLDB998CC0 | N/A | No lights are on. The dishwasher heating element is constantly on. | Awaiting receipt of timer |
| MIAMI, Florida | pldb998cc0 | N/A | smoke started coming out of dishwasher. Turned off breaker. when turned back on there are no lights and it will not start. | Awaiting receipt of timer |
| Spokane, Washington | PLDB998CC0 | Random | Runs through partial cycle then starts random blinking of LEDs, motor, relays, and starts and stops, rapidly. Have to shut down the dishwasher, as it will continue to do this randomly. | Awaiting receipt of timer |
| Whittier, California | PLDB998CC0 | N/A | Water got in to the control box | Awaiting receipt of timer |
| Cambridge, Massachusetts | PLDB998CC0 | N/A | After about 30 minutes of running the wash the washer starts to make a clicking sound about once a second and the lights flash. The display flashes alternately CL and whatever the appropriate value is for the state of the wash.
Frigidaire recommended changing the control panel but they are out of stock. | Awaiting receipt of timer |
| andover, Minnesota | pldb998cc | ho,cl | to hot | Awaiting receipt of timer |
| W. Kelowna, British Columbia | PLDB998CC0 | CL | Partway through cycle, Code CL flashes, clicking sounds like a relay, washer eventually quits. | Awaiting receipt of timer |
| beauharnois, Québec | PLDB998CCO | CL & NA | | Awaiting receipt of timer |
| Liverpool, New York | | N/A | | Awaiting receipt of timer |
| Homer Glen, Illinois | PLDB999CC0 | FLashes tiem and cli | At start of wash cycle the time display starts flashing every second with a click sound. After a while the pipes would make a bump noise as if the pump is gpoing on and off. Sometimes the cycle will complete with just the clicksin and flashing and no bumpoing noise. Also believe the defautl hot airt dry is no longer working. | Awaiting receipt of timer |
| verona, Wisconsin | pldb998cc0 | N/A | dishwasher motor will not run no power from control | Beyond Repair |
| Ottawa, Ontario | PLDB998CC0 | CL | The dishwasher start normally and then stops partway through the program. Sometimes it stops with a clicking sound at the 27 minute point in the cycle. But it has stopped at other points as well.
Control panel flashes and washer makes bumping noises as it operates. | Awaiting receipt of timer |
| Arborg, Manitoba | PLDB999CC0 | CL | approx 30 minutes into wash cycle it begins to click and intermitently from the control panel and flash a CL error code. If left it will get worse and completely shut down. All other components seem to work fine. | Beyond Repair |
| Ipswich, Massachusetts | gsb5712bc1 | N/A | water got into timer box | Beyond Repair |
| Powder Springs, Georgia | PLDB98CC0 | N/A | clicking and skipping throughout cycle; never completes. Troubleshot with appliance repair man and came to the conclusion that it is circuit board/timer. | Awaiting receipt of timer |
| Cutler Bay, Florida | PLDB998CC0 | N/A | The dishwasher start and cycles normally and then stops partway through the program. It constantly intermit start stop with a clicking sound and the motor bumps on and off at the 33 minute point in the cycle. Then it completely stops.
If cannot be repaired- would like to purchase a reconditioned timer | Beyond Repair |
| Goodrich, Michigan | | CL | | Awaiting receipt of timer |
| Edina, Minnesota | | No Code | Control board does not work. Power going in but does no turn on. | Awaiting receipt of timer |
