| Homer, Alaska | SHU 4026 UC/U06 | N/A | The timer catches on the 6:00 and 9:00 positions and needs manual adjustments to continue cycle. | Repaired |
| Homer, Alaska | SHU 4026 UC/U06 | N/A | Timer is getting stopped at 6:00 and 9:00 positions during cycle and requires manual progression to continue run cycle. | Repaired |
| Wappingers Falls, New York | SHU4006UC/U06 | N/A | Timer needs a little help progessing to the next stage in wash cycle | Awaiting receipt of timer |
| Scotts Valley, California | SHU3016UC | N/A | DURING A WASH CYCLE THE TIMER STOPS MOVING THE DIAL. DURING A RINSE CYCLE THE TIME STOPS MOVING THE DIAL. | Awaiting receipt of timer |
| Surrey, British Columbia | SHU4006UC/U06 | N/A | Sticks in washing cycle | Awaiting receipt of timer |
| San Luis Obispo, California | SHU4000 | N/A | Timer stops advancing, has to be prodded along to continue | Awaiting receipt of timer |
| Tampa, Florida | SHU4016UC/U06 | none | Sticks at about 7+/-
New or reconditioned timer replacement OK. Pls call
8132545333 | Repaired |
| Mercer island, Washington | | N/A | Sears repair guy said timer isn't allowing to go to the next cycle. | Awaiting receipt of timer |
| Toronto, Ontario | SHU4016UC | N/A | the timer stops and is not advancing, the dishwasher will work forever if I do not move it manually. | Repaired |
| Trail, British Columbia | | N/A | it stops at various points in cycle and has to be manually advanced. | Awaiting receipt of timer |
| HURLEY, New York | SHU4006UC | N/A | Not advancing to next setting at 6 and 9 o'clock | Repaired |
| Lexington, Massachusetts | SHU 400UC/U06 | N/A | The timer stalls and does not advance after the first cycle | Awaiting receipt of timer |
| Broadview Hts, Ohio | SHU3006UC/06 | N/A | Timer hangs at +/-5 and 9 o'clock positions. | Repaired |
| Opelika, Alabama | shu4006uc | N/A | The timer frequently gets stuck during both the wash and rinse cycles, and will not complete unless we manually push it forward a bit. | Repaired |
| Delta, British Columbia | SHU4002W | N/A | Timer stops part-way through cycle at several locations (approx. 5:00, 9:00). Will complete the cycle if it is advanced slightly by hand. Recently this happens more frequently, but sometimes goes through the complete cycle without intervention. | Repaired |
| Redwood City, California | SHU3006UC/U06 | N/A | Timer occasionally gets "stuck" at the end of the rinse phase. | Awaiting receipt of timer |
| Aptos, California | SHU4022UC | N/A | Run and Stop in middle of cycle | Repaired |
| Rochester Hills, Michigan | SHU4002UC | N/A | Timer stops mid cycle | Repaired |
| LITTLE COMPTON, Rhode Island | sh3002uc/u06 | N/A | timer no longer advances | Repaired |
| Nashville, Tennessee | SHU4006UC/U06 | N/A | TIMER DIAL STOPS TURNING. SOMETIMES WORKS. | Awaiting receipt of timer |
