316207603 Frigidaire Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Frigidaire timer model # 316207603 |
![Frigidaire ERCs and Frigidaire stove clocks and timers]() |
Manufacturer : |
Frigidaire |
| Part Number : |
316207603 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Clock/Timer, EOC |
|
Do you have a failed Frigidaire 316207603 timer?
Click here:
We can repair or replace your faulty 316207603 timer. |
![Request Appliance Timer Service]() |
Clock/Timer, EOC timer Part Number 316207603 is used in the following appliances |
Recent Service Requests for Frigidaire Part Number 316207603| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Merrick, New York | PLGF389CCC Gas Range | PF, then turned off | When I plugged in, timer blinked 12 with code PF; oven will not turn on; stove top burners work. | Awaiting receipt of timer | | Carmel, Indiana | plgf389cca | F1 | F1 error | Awaiting receipt of timer | | Des Moines, Iowa | PLGF398CCB | no code | nhvkjhk | Awaiting receipt of timer | | Cambridge, Ontario | PLGF389CCC | F3 | F3 error code would come up 2-3 minutes after starting oven. Tested resistance of the probe at ~ 1100 ohms at room temperature, which is what it should be (according to online). But since the F3 fault appeared after the oven was warmed up a bit, I figured I would replace the probe anyway in case it was a probe problem that only showed up above room temperature. New probe installed. F3 error code now shows up immediately after starting oven. | Repaired | | garrett, Indiana | plgf389ccc | power surge | had a power surge and display went blank | Awaiting receipt of timer | | VANCOUVER, British Columbia | PLGF389CCB | F3 | We are getting a F3 fault code which I believe the most common error is the temp sensor which I ordered and replaced. The error F3 is still recurring. The next stepis to check the Electronic oven control. | Repaired | | Verdun, Quebec | PLGF389CCC | F3 and F1 and goes b | beeping and the display is going blank or F1 or F3 error. problem is intermittent It was repaired last November.. | Beyond Repair | | Verdun, Quebec | PLGF389CCC | F3 and F1 | Display is blank and when it does display it will beep and give and F3 or F1 error. Not able to clear error without unplugging range. | Repaired | | Long Beach, California | Plgf389ccc | Start button does no | Start button does not work. | Awaiting receipt of timer | | Kamloops, British Columbia | plgf389ccb | F3 | Oven functions but goes off intermittently | Awaiting receipt of timer | | Vancouver, British Columbia | GLG F388 ASD | N/A | Power surge fried it | Repaired | | Huntsville, Ontario | plgf389aca | f1 | f1 code and alarm | Awaiting receipt of timer | | Warren, Ohio | plgf389aca | N/A | Can't reset clock,can't set oven.PF flashes. | Awaiting receipt of timer | | Holland, Michigan | PLCS389ACB | none | At first the one on the touch pad didn't work and now the clear and four doesn't work. We are able to use the oven but we have to turn the breaker off to shut the oven off. If this isn't repairable then send a recondition timer. I'm pretty sure the timer part number is correct but it might not be. The timer hasn't flashed any fault codes.
Thanks, Ron | Repaired | | Watsontown, Pennsylvania | GLGF388CQA | none | Our oven doesn't work, nor does the oven light come on. All the buttons on the timer work properly, but the oven itself doesn't work. At first the problem was intermittent. I replaced the oven ignitor and it worked after that one time. I cannot think of anything else that may be wrong except the timer itself. Each year we usually lose power several times and the oven timer needs to be reset. I don't know if that may have caused the problem. | Repaired | | Belle River, Ontario | | N/A | F3 | Awaiting receipt of timer | | Belle River, Ontario | CGLGF388CSA | F3 | F3 showing up every time oven is turned ON, display goes OFF sometimes and now won"t even start heating oven.
Thanks, | Beyond Repair | | Cranston, Rhode Island | •Frigidaire Range/Stove/Oven Oven Control Board | no power | Board shows no power leaving control transformer on board looks as if has small scorch mark or burn hole on side of transformer. Additional info on board is ES-400 Gas SF5501-S7603-N states model number on timer is 316207603 | Awaiting receipt of timer | | kalamazoo, Michigan | | f1 | f1 failure code , now nothing | Awaiting receipt of timer | | Toronto, Ontario | PLGF 389CCA | U1 ; U7 | Pick up timer and control front pad. | Repaired |
|
