| Mission, British Columbia | C970-440832 | F20 | Had power surge, has happen before, have two timers I can ship you, need only one back, sold house, just have to have stove working. | Awaiting receipt of timer |
| Ottawa, Ontario | C970-678193 | F10 | oven was set to 325 F. Oven overheated, beeped and diplayed code F10. After the oven cooled I checked the resistance on the temperature sensor. It read 1085 ohms which is about right. | Repaired |
| Edmonton, Alberta | elite c970-440834 | na | broiler does not work but all other oven functions work. if i unplug the oven the broiler will work once when unplugged. | Awaiting receipt of timer |
| Queensville, Ontario | C970-440-882 | ERR | Broiler activated during baking mode.
Cooling fan runs long after oven cooled. | Repaired |
| Queensville, Ontario | C970-440-882 | ERR | Broiler activated during baking mode.
Cooling fan runs long after oven cooled. | Repaired |
| Morden, Manitoba | Elite C970-440833 | F10 | Control Board Malfunction. F10 Error Code. Top burner will stay on and overheat. | Repaired |
| Toronto, Ontario | C970-440835 | F1-F20 | Top range stove does not work | Awaiting receipt of timer |
| OSOYOOS, British Columbia | C970-440833 | F13 | self cleaning oven option does not work, fault F13 is displayed. | Repaired |
| Dartmouth, Nova Scotia | Kenmore Elite | No code presents | Stove will only reach pre heat levels. We have been told by the appliance repair company that it is the timer. | Awaiting receipt of timer |
| Hamilton, Ontario | C970-440835 | either F1 or F10 | every time we use oven we get beeping sound and flashing display. | Awaiting receipt of timer |
| Burnaby, British Columbia | Kenmore C970-440832 | F10 | error F10 | Repaired |
| nanaimo, British Columbia | c970-440833 | f10 | when using oven failure code f10 starts flashing and beeps. have to hit the circuit breaker to reset. then try cooking again and just happens again. burnt some cookies in about 4 minutes. | Repaired |
| Victoria, British Columbia | C970-440882 | F10 | Oven overheats after temp sensor replacement | Replaced with reconditioned timer |
| Victoria, British Columbia | C970-440882 | F10 | On several occasions over the last 6 months one or more of these has happened:
1. Oven over or underheats during baking
2. Broiler element does not turn on
3. Broiler element only comes on when bake selected and runs at maximum heat
4. | Replaced with reconditioned timer |
| Vancouver, British Columbia | Kenmore Elite C970-440832 | F5 | Elements' displays show error code F5 00 and beeps approximately once per second. Neither range elements or oven work. Removing power (via breaker) for 5 minutes then restoring power clears the error but the clock is blank and after attempting to heat any element, it initially works for about 10 seconds then the error code returns and the beeping returns. | Beyond Repair |
| Airdrie, Alberta | C970-440832 | none | Clock and stove top element controls work. Oven elements (broil, warmer bake and convection) do not work. I have checked out / replaced power relay board and the UIB board. | Repaired |
