316462808 Kenmore Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Kenmore timer model # 316462808 |
![Kenmore ERCs and Kenmore stove clocks and timers]() |
Manufacturer : |
Kenmore |
| Part Number : |
316462808 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Kenmore 316462808 timer?
Click here:
We can repair or replace your faulty 316462808 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Kenmore Part Number 316462808| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Cardigan, Prince Edward Island | 970-678533 | F1 | Temperature rise with no control, visible resistor damage on board | Repaired | | Owen Sound, Ontario | 970-678533 | None | There are 3 burnt terminals on the board for the broiler | Repaired | | Cardigan, Prince Edward Island | 970C648520 | F10 | The Relay Board has visible burn marking on it. The system went into overheat error F10 | Repaired | | Port Coquitlam, British Columbia | 970-678592 | F10 | Since moving in to our new house we noticed that the oven was baking our food a lot quicker than we were used to.
After a day or two the F10 error appeared, beeping until the over was switched off at the breaker.
upon opening the back of the over, I can see the circuit board is burnt! When I disconnected all the connectors, the 'Bake' connector came out. And one of the resistors is severely burnt. | Repaired | | Toronto, Ontario | 970-6785 | n/a | Oven just heats up well beyond temperature set. | Repaired | | Cambridge, Ontario | 970-687690 | N/A | The bottom bake element does not come on when the bake button is selected. We replaced the temp sensor and the baking element and it still was a problem. We had a repair tech in who advised it was a control board issue hence our desire to see if it can be fixed. | Awaiting receipt of timer | | Mt Pearl, Newfoundland and Labrador | Kenmore 970-678630 | No failure code. | Broiler in oven not working. Replaced broil element after fire in oven due to break in old broil element that caused electrical panel breaker to switch off.
No power going to new element from Oven control panel. | Repaired | | Waterloo, Ontario | 970678533 | no code. | Everything works except Broiler and baking takes longer to get to baking temperature.... Oven problem | Repaired | | trois-rivieres, Quebec | 970-687630 | f10 | four surchauffe | Awaiting receipt of timer | | Mt Uniacke, Nova Scotia | C648490 | N/A | bottom element will not heat up | Awaiting receipt of timer | | Conception Bay South, Newfoundland and Labrador | 970C648530 | F10 | my oven will heat up but once it is heated I get a code F10, a beeping noise and my oven shuts off. | Awaiting receipt of timer | | Georgetown, Ontario | C970-678590 | N/A | Oven will not heat to temperature. Both elements read 110V when checked. Probe reads 1100 ohms. | Repaired | | Saint-Hippolyte, Quebec | 970-6785 | N/A | Blown resistor in the middle bottom of the board.
I want to know if my oven may be the cause for what happened or if it is the timer problem. | Repaired |
|
