318012928 Frigidaire Range (Oven, Stove) Timer Repair |
Failure codes, problems, and resolutions for Frigidaire timer model # 318012928 |
![Frigidaire ERCs and Frigidaire stove clocks and timers]() |
Manufacturer : |
Frigidaire |
| Part Number : |
318012928 |
| Appliance Type : |
Range (Oven, Stove) |
| Color : |
White |
| Description : |
Clock |
|
Do you have a failed Frigidaire 318012928 timer?
Click here:
We can repair or replace your faulty 318012928 timer. |
![Request Appliance Timer Service]() |
Clock timer Part Number 318012928 is used in the following appliances |
Recent Service Requests for Frigidaire Part Number 318012928| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Tecumseh, Ontario | | dim display | the display of temprature is hard to see. Everything else works fine. I have been in contact with Howard Simons on this and sent pictures. I was just waiting for after Canadian Thanksgiving to take the controler out of the oven. | Repaired | | Iona station, Ontario | CFES387CFS5 | N/A | Very very dim digital display | Awaiting receipt of timer | | Huntsville, Ontario | Gallery | N/A | The display has gone dim to the extent we can no longer see the temperature or set temperature. The oven works fine, we just can't see anything on the panel. | Awaiting receipt of timer | | Huntsville, Ontario | Gallery | N/A | The display has gone dim to the extent we can no longer see the temperature or set temperature. The oven works fine, we just can't see anything on the panel. | Awaiting receipt of timer | | Laval, Quebec | CFES387CFS5 | N/A | Oven does not work but stove and display are fine. | Repaired | | Calgary, Alberta | CFES387CFS5 | non | Digital clock doesn't work. Black display.
All oven functions don't work as well | Repaired | | Edmonton, Alberta | CFES387CFS6 | None | Bake engages the element, but doesn't disengage when it hits temperature. Diagnosed as a relay failure (we believe caused by water damage during a spill while canning) | Beyond Repair | | North Vancouver, British Columbia | CFES387CFS2 | N/A | timer membrane is cracked, numbers are dim and difficult to read | Awaiting receipt of timer | | Wheatley, Ontario | CFES388JFS5 | F-3 | replaced temp sensor and but still getting error code F-3. | Repaired | | Manotick, Ontario | CFDS389JGB2 | N/A | Does not work. | Beyond Repair | | Val dor, Quebec | Cfds389jgs3 | N/A | Display very low and hole in the face ( plastic broken) | Awaiting receipt of timer | | Dartmouth, Nova Scotia | CFES387CF | N/A | Always has dim, barely readable display. Poor segment illumination. Works well otherwise. | Repaired | | Kentville, Nova Scotia | CFES387CFS6 | n/a | The display is very dim, especially for the temperature.
The text / arrows are very worn (would be a bonus if that could be fixed as well). | Repaired | | Trois-Rivieres, Quebec | cfes387cf | N/A | display too dim | Awaiting receipt of timer | | Belleville, Ontario | CFES387CFS5 | N/A | Bottom element not working | Repaired | | Oxford, Nova Scotia | CFES388RFS5 | No code | Oven/timer/clock not working. Power into unit, but no power out. | Repaired | | Delta, British Columbia | CFDS389JGB3 | N/A | Timer has been discontinued. Ours works fine except when the oven is on you cannot read the digital temperature, it is on but very faint. We can live with it if necessary but if you can provide one at an appropriate cost it will be cheaper than getting a new stove. | Awaiting receipt of timer | | Ottawa, Ontario | CFES387CFS3 | n/a | no display, no functions, no heat in oven. Range still works | Repaired | | Ottawa, Ontario | CFES387CFS3 | n/a | no display, no functions, no heat in oven. Range still works | Repaired | | Gagetown NB, New Brunswick | CFES387CFS6 | F-3 | 1.-Controller flashes F-3 and oven doesn't work
2.-Protective cover over controller is worn through
3.-Temperature display is very dim and would be nice if it can be fixed..... but not essential | Repaired |
|
