| Thompson, Manitoba | C970-632221 | f1 | Oven starts heating and then it stops and throws the code F1.
Also there is something wrong with the buzzer. | Repaired |
| Arborg, Manitoba | C970-632221 | oven wont work | oven doesnt work. | Repaired |
| Ste-Marthe-sur-le-lac, Quebec | C970-612021 | N/A | | Awaiting receipt of timer |
| paradise, Newfoundland and Labrador | c970-592083 | unknown | oven not working broil or bake .stovetop | Repaired |
| Invermere, British Columbia | C970-612022 | n/a | This oven control will not turn on the broil or bake elements. There is 120 volt power coming in on both of the circuits but only comes out on L2. The output on L1 on both the broil and bake functions have no power. The clock and timer still function. | Repaired |
| lourdes de blanc sablon, Quebec | c970-603021 | f1 | everything seems to be working fine until the oven has been on for a while then the F1 code comes up and an alarm sounds | Repaired |
| Brockville, Ontario | C970-512021 | N/A | Oven continues to heat into an overheat condition, The thermocouple is good. I assume the relay contacts are Welded togethe and the controller. Is not working. Correctly. | Awaiting receipt of timer |
| Edgewater, British Columbia | C970-552121 | F1 | I set the oven to the temperature I want; when the oven reaches the desired temperature, it beeps and immediately the broiler turns on as well as the bottom element. Within minutes the oven signals an F1 Error Code and shuts itself off. Note: I discovered that if I leave the oven door open slightly, the oven doesn't reach the desired temperature so it never turns off, switches to broil, codes F1 on me... but obviously I can't use it to bake anything. | Repaired |
| St. John's, Newfoundland and Labrador | C970-592083 | N/A | Oven won't turn off, checked thermostat and overload as well as both oven elements all working fine. | Awaiting receipt of timer |
| Laval, Quebec | C970-512021 | None | Broiler will not function on High. Upper element doesn't function on high setting at all & gets warm on low setting. Lower element works fine on bake & when wires are swapped from lower to upper element the upper element will get red hot on bake. Checked temp probe & thermal fuse & fuses & wiring all seems good. Circuit board visually inspected for damage or burn marks all seems good. | Awaiting receipt of timer |
| Terrebonne, Quebec | | N/A | DOES NOT LIGHT UP | Awaiting receipt of timer |
| Thessalon, Ontario | c970-552521 | F1 | After selecting 'bake' and any temperature setting, the oven preheats (beeps) but the lower heater element does not turn off. The oven continues to heat up until the F1 alarm sounds and displays on the control screen. Checked heat probe located inside oven, it reads 1066 ohms. | Awaiting receipt of timer |
| Paradise, Newfoundland and Labrador | kenmore | N/A | oven not functioning properly | Awaiting receipt of timer |
| stratford, Ontario | | N/A | burned out | Replaced with reconditioned timer |
| Lindsay, Ontario | | N/A | not sure...to do with heat in oven | Repaired |
| Listowel, Ontario | C970-612021 | N/A | oven shuts on overheat-cools down and repeats problem-- | Timer inspected, no repairs necessary |
