3182391 Whirlpool Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for Whirlpool timer model # 3182391 |
![Whirlpool ERCs and Whirlpool stove clocks and timers]() |
Manufacturer : |
Whirlpool |
| Part Number : |
3182391 |
| Appliance Type : |
Range (Stove, Oven) |
| Color : |
|
| Description : |
Electronic oven control assembly black (part number 3182391 replaced with 3169258) |
|
Do you have a failed Whirlpool 3182391 timer?
Click here:
We can repair or replace your faulty 3182391 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Whirlpool Part Number 3182391| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| St. Louis, Missouri | RB770PXYB | N/A | A power surge "fried" the timer. We cannot use the oven at all. | Beyond Repair | | Billings, Montana | RF396PXYW0 | F1 | Oven does not seem to be at temperature. Things take longer to cook than they should. If you set the oven to preheat to say 400 degrees, and when it chimes to let you know that it is at temperature, you can shut off the oven and turn it back on and it will say the temperature may only be 300. judging from what I have seen online it appears to be the clock/control board. When I press bake for 4 seconds, like it says to do in the manual, I get a F1 fault code. | Awaiting receipt of timer | | Bedford, New Hampshire | RB160PXYB0 | F3 | Occassionally the Oven stops cooking with a F3 error. The temerature sensor has been replaced previously. | Repaired | | Great Falls, Montana | RB260PXYB | no code | Will not maintain heat. We set the control to say 350 and it turns on. Sometimes it gets to 350 degrees but most of the time not. | Beyond Repair | | Wausau, Wisconsin | RB260PXYB | N/A | Oven temp not accurate. Does not respond to temp change input after preheating. Broiler doesn't come on/heat properly. | Repaired | | Austin, Texas | RB260PXBY | N/A | Does not turn on bottom heater element (suspect relay or some other component on circuit board)
Steve S. | Repaired |
|
