343912 General Electric/Kenmore Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for General Electric/Kenmore timer model # 343912 |
![General Electric (GE) ERCs and General Electric (GE) stove clocks and timers]() ![Kenmore ERCs and Kenmore stove clocks and timers]() |
Manufacturer : |
General Electric/Kenmore |
| Part Number : |
343912 |
| Appliance Type : |
Range (Stove, Oven) |
| Color : |
|
| Description : |
Electronic clock control - Discontinued by the manufacturer |
|
Do you have a failed General Electric/Kenmore 343912 timer?
Click here:
We can repair or replace your faulty 343912 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for General Electric/Kenmore Part Number 343912| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Madison, Virginia | 911.4698814 | F7 | Stove was "beeping" at which time I saw the error code F7. Upon turning the circuit breaker off, then back on, the stove beeps and the word "door" is shown on the display. After approximately 10 seconds, the word "door" disappears and the error code F 7 appears! | Timer inspected, no repairs necessary | | Seaford, Delaware | 931 4698815 | N/A | Oven cancel switch loose , timer set switch | Awaiting receipt of timer | | Washington,, District of Columbia | 911-4698814 | F 1 | All the functions work for about 10-15 seconds and then an F 1 display with beeping occurs. We spoke this moring and I checked the push buttons. | Beyond Repair | | Fairfield, Pennsylvania | 911.4698815 | Unknown | Range LED control face does not display digits for oven temperature correctly | Beyond Repair | | Amarillo, Texas | 911.4698815 | N/A | None of the oven buttons work, don't even make a beep sound when pushed. | Replaced with reconditioned timer | | Richmond, British Columbia | Classic Grille Slide-In 911-4698813 | F5 | I am getting (F1 or) F5 errors (which I had been able to avoid or delay by running the fan while using the oven), and the lower element does not seem to work now (broil seemed OK). The resistor coatings are a bit corroded.
Only once, I heard a buzzing sound from under the oven when I turned it on which must have been a solenoid--I pulled that box out and things looked brand new so I am thinking at that moment, the control panel wasn't sending enough current to properly activate the solenoid. | Beyond Repair | | Maberly, Ontario | Clasic Grill 911.48781C1 | F3 solid now. F2 pre | F3 code always on Bake or Broil with temperature sensor plugged in or disconnected. Previously we have had F2 codes that cleared after the oven cooled. A new temperature sensor was installed lately. | Replaced with reconditioned timer | | Maberly, Ontario | Clasic Grill 911.48781C1 | F3 solid now. F2 pre | F3 code always on Bake or Broil with temperature sensor plugged in or disconnected. Previously we have had F2 codes that cleared after the oven cooled. A new temperature sensor was installed lately. | Replaced with reconditioned timer |
|
