74001810 Maytag Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Maytag timer model # 74001810 |
|
Manufacturer : |
Maytag |
Part Number : |
74001810 |
Appliance Type : |
Range/Stove/Oven |
Color : |
|
Description : |
Clock |
|
Do you have a failed Maytag 74001810 timer? Click here: We can repair or replace your faulty 74001810 timer. |
|
Recent Service Requests for Maytag Part Number 74001810City | Model Number | Failure Code | Problem Description | Resolution |
---|
Gunn, Alberta | CWE9030DDB | N/A | Can't turn off the oven. Could it be the touch panel, rather than the timer?
I would like to have my electrician remove the whole front panel and send it all to you for inspection. | Repaired | SUMNEYTOWN, Pennsylvania | CWE9030DDB | F-7 | Show F-7 code when we replaced the old one with this one | Repaired | SUMNEYTOWN, Pennsylvania | CWE9030DDB | did not show code | Did not show any failure codes. Fans did not go on for convection or reg oven working operation. | Repaired | SUMNEYTOWN, Pennsylvania | CWE9030DDB | F-7 | Show F-7 code when we replaced the old one with this one | Repaired | SUMNEYTOWN, Pennsylvania | CWE9030DDB | did not show code | Did not show any failure codes. Fans did not go on for convection or reg oven working operation. | Repaired | Innisfil, Ontario | | N/A | Oven does not heat up. THe broiler heats up but not the oven. | Repaired | Val-des-Monts, Quebec | CWE9030BDB | F7 | Sending this back for repair under warranty (Invoice no. 110608 june 28 2016).
Unit worked OK til 2 weeks ago.
Oven heats to set temp but after 15 - 30 minutes it starts to beep intermittently then finally stops and flashes F7. Tends to happen at higher oven temps. Resets after power restored and it has cooled down. F7 continues to flash after I remove the ribbon connector to the touch pad control panel.
This is a similar problem to when sent in first time.
Call me if unit cannot be repaired!!!!! | Awaiting receipt of timer | Stoney Creek, Ontario | CWE9300DDB | f5, f3 | Works intermittently. Sometimes display f5,f3. I'm a repair guy. Customer says sometimes code comes up when reaching no more than 400 degrees. Sometimes cooling fan comes on. | Repaired | Val-des-Monts, Quebec | cwe9030bdbd | f3 | Replaced oven temp sensor and same problem.
Oven heats to set temp but after awhile (5-30 min) F3 code starts. Try restart oven but immediately get F3.
Sometimes after cooling down I get F3 code immediately. | Repaired | MC GRATYH, Minnesota | CWE9030DDB | F7 | ERROR CODE F7. OVEN DOES NOT TURN ON. BEEPS EVERY FEW SECONDS | Timer inspected, no repairs necessary | val des monts, Québec | cwe9030bdb | f7 | works for a few minutes ,then goes into fail code | Awaiting receipt of timer | val des monts, Québec | cwe9030bdb | f7 | works for a few minutes ,then goes into fail code | Awaiting receipt of timer |
|