7601P12360K Magic Chef Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Magic Chef timer model # 7601P12360K |
![Magic Chef ERCs and Magic Chef stove clocks and timers]() |
Manufacturer : |
Magic Chef |
| Part Number : |
7601P12360K |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Magic Chef 7601P12360K timer?
Click here:
We can repair or replace your faulty 7601P12360K timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Magic Chef Part Number 7601P12360K| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Calgary, Alberta | W-130 | None I Know Of | You cannot set the time. Set knob does not function | Repaired | | Honolulu, Hawaii | | N/A | Missing the push buttons and the oven light button | Awaiting receipt of timer | | Toledo, Ohio | NGW3J8TKSVW | F2, F4 | When setting Bake Temp. error code F2 or F4 displays most of the time. Sometimes it will work if you baby it at lower temperature settings and slowly raise it. I've had the rheostat re-soldered to the circuit board because it was loose. I suspect the soldering job caused some kind of short. I've tested the temperature sensor and get 1080 ohms as expected so do not think that is the problem. | Awaiting receipt of timer | | Havana, Florida | LCRE800 | N/A | Timer, clock, self-cleaning function, ability to set clock all not working. Timer or clock numbers are black, do not light, no LCD light visible at all. All 4 buttons broken off. | Repaired | | la habra, California | cwe5500acb | clock keeps blinking | clock keeps blinking | Repaired | | San Leandro, California | 59E-5EXW | N/A | Does not work, just dark. Oven works fine, just this part does not work. | Timer inspected, no repairs necessary | | grosse pointe woods, Michigan | w216 | N/A | As we talked today on the phone send rotary switch that controls the set timing function to solder in timer 7601P123-60k | Replaced with new in-stock timer | | Kenly, North Carolina | w116 | N/A | There is a dial/knob to the right of the display that is used for setting/adjusting the time (clock) and for setting the timer. When the knob is turned, the numbers on the screen fluctuate quite substantially. It starts at 0 and the next number could be 8 or 2 and the next could be up to 20. I have not been successful in using any form of pressure in any direction to force the knob to work as intended. | Repaired |
|
