Lethbridge, Alberta | Cwe9000 | F1 | F1 code randomly appears along with beeping. | Awaiting receipt of timer |
Chilliwack, British Columbia | CWE9000 | no failure code | The panel does not light up can not read numbers ( settings ) | Repaired |
Rohnert Park, California | CME900 | none | Timer seems to work OK initially, but when temp selected it turns on for a few seconds (20) then shuts off. Same for both bake and broiler requests. | Repaired |
Rohnert Park, California | CME900 | N/A | Oven or broiler starts to turn on the shuts off after a few seconds and goes back to the 'ready' stage. No error codes displayed. | Repaired |
WEST VANCOUVER, British Columbia | 59FN-5TVW5.9kw | don't know | lower element does not come on or if it does very little heat | Awaiting receipt of timer |
Aurora, Ohio | CWE9000-ACE | none | 1. Main Problem is Broil relay is energized constantly when range power is on. Broil relay contacts are open when power is off, so the broil relay is not faulty.
2. Minor problem with main EL display. It's becoming pixelated, and harder to read. Concerned that it will soon become unreadable. | Awaiting receipt of timer |
Mattawa, Washington | ECWE900 | None | Bake/broil will not start unless button is held down for several seconds (waiting for a "click")--more recently, elements shut off shortly after starting. Buzzing sound (electrical) from timer is heard. | Repaired |
Rockville, Maryland | CWE900 | None | Background - You successfully repaired TWO timers for my separate double ovens back in March, 2010. The part number shown above is copied from the email I received from you when they were repaired. One oven continues to work normally. The other fails to heat or broil at all. Shortly after selecting bake and setting a temperature, or setting it to broil (4 seconds) a noticeable click is heard, followed by the sound of a low-speed fan. This occurs on BOTH ovens. In the one that fails to heat, however, the coils never warm up and within right around 20 seconds after the fan is heard to start the setting displayed in the panel clears and it goes to back as though the unit was not turned on at all. | Repaired |
Chesterfield Twp., Michigan | 59f-5txw | N/A | Bake elements heats but does not come to set heat. Will heat to approx. 40 To 50% of setting. I can get this to go higher if I try Broil element. I have checked element for defects & continuity and sensor probe has a reading of approx. 1100 ohms. Replaced 30 amp 220v circuit breaker. Magic Chef 59F-5TXW, sr# 22C129584602 | Awaiting receipt of timer |
Sea Ranch, California | CWE9000acb | F2 | Fan comes on and off at random times having nothing to do with the oven's use. Then the F2 alarm started up intermittently. The oven inside temperature always seemed a little cold but I never measured what it was doing. | Repaired |
beaver falls, Pennsylvania | cwe 9000 bce | no | burner element turns red initially but then cools and wont reach desired temp | Awaiting receipt of timer |
Chesterfield, Missouri | CWE900 | none | oven will not reach displayed temperature - roughly 150 to 200 degrees less than on display. already replaced temperature sensor probe. | Repaired |
Jamesville, New York | 59F-5TXW | None | Oven will not heat past 325-350. Temperature on panel shows 550. Internal temp gauges show oven is about 200 degrees lower than set point.
we replaced oven temp sensor but no change.
Please repair and return.
Thank you. | Repaired |
traverse city, Michigan | a59f-5txw | N/A | Oven works, elements work, sensors/thermostat function, but oven fails to reach temp, is about 150 degrees cooler than needed.
Looking to replace with a reconditioned functional part. | Awaiting receipt of timer |
Narol, Manitoba | 5F-5TXW | None | Clock and timer buttons work but clean button and broil and bake buttons do not work. They don't even beep. | Awaiting receipt of timer |
Acton, Massachusetts | 59FN5TVW | N/A | Does not reach displayed temperature. e.g. if set to 550F, displays 550F but only reaches ~350F. | Repaired |
cedar, Michigan | cwe9000 | f1cannot control tem | goes into f1 fault code can not regulate temp setting just goes to 500 degrees | Awaiting receipt of timer |
Townsend, Massachusetts | CWE9000ACB | F2 & F3 | Broil stayed on | Awaiting receipt of timer |
Ellensburg, Washington | CWE9000 | F-1 | Timer goes off at random times and when you press cancel it stops it for a while and then it goes off again. | Awaiting receipt of timer |
Oklahoma City, Oklahoma | CWE9000ACE | N/A | Oven heats to approx 200 degrees then stops heating no matter what the setting. | Repaired |