7601P20060 Maytag Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Maytag timer model # 7601P20060 |
![Maytag ERCs and Maytag stove clocks and timers]() |
Manufacturer : |
Maytag |
| Part Number : |
7601P20060 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Maytag 7601P20060 timer?
Click here:
We can repair or replace your faulty 7601P20060 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Maytag Part Number 7601P20060| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Fargo, North Dakota | CRE9400ACE | F5 | The oven has always F5 error | Awaiting receipt of timer | | Morgantown, West Virginia | CRE9500ACE | F1 | F1 on power-up
Oven doesn't reach selected temperature | Awaiting receipt of timer | | Falls Church, Virginia | Maytag #CRE95000ACE | N/A | Oven temperature will not go above 250 degrees. | Awaiting receipt of timer | | Goffstown, New Hampshire | CRE9600ACE | Not keeping temp | Oven warms up, but will not keep temperature. Checked sensor and not the problem. Need timer unit ASAP. | Awaiting receipt of timer | | Williamsville, Vermont | CRE9800ACE | N/A | Stove tempature not accurate | Awaiting receipt of timer | | Montrose, Michigan | CRE9800ACE | None | Oven temp is lower than selected. Checked temp sensor, element, adn high limit sensor. All seem fine. | Repaired | | Hutchinson, Kansas | cre9400ace | N/A | oven temp not hot enough | Repaired | | Rock Rapids, Iowa | CRE9800ACE | n/a | Bake function is not working. Element tests good also bake relay tested good. Assume it is in the electronic control board. | Repaired | | Cheshire, Connecticut | CRE9800ACE/Maytag | None | Select temp on control unit shows it has reached set temp but oven guages show at least 150 degrees less. Ex. Set at 500 it may reach 325 to 350. I spoke to your owner and advised him that I changed oven sensor and he felt that problem could be in control board . | Repaired | | Taylorsville, Utah | CRE9600ACE | NONE | Oven temp control is not with-in specs. Oven temp on control board is about 70 F.above actual temp.
Oven temp. control is failed. Sensor in oven is reading correct ohm values. | Awaiting receipt of timer | | Taylorsville, Utah | CRE9600ACE | NONE | Oven temp control is not with-in specs. Oven temp on control board is about 70 F.above actual temp.
Oven temp. control is failed. Sensor in oven is reading correct ohm values. | Awaiting receipt of timer | | Elmwood, Wisconsin | cre9600ace | N/A | Clock times does not lite up. I think to many volts were run through it. 220 instead of 110. Im not sure that the part number is correct | Repaired | | tacoma, Washington | cre9800ace | f02 | temp wont go above 225 tried replacing the temp sensor and no change | Awaiting receipt of timer | | union bridge, Maryland | cre9800ace | f1 | | Beyond Repair |
|
