7601P22460 Maytag Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Maytag timer model # 7601P22460 |
|
Manufacturer : |
Maytag |
Part Number : |
7601P22460 |
Appliance Type : |
Range/Stove/Oven |
Color : |
|
Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Maytag 7601P22460 timer? Click here: We can repair or replace your faulty 7601P22460 timer. |
|
Recent Service Requests for Maytag Part Number 7601P22460City | Model Number | Failure Code | Problem Description | Resolution |
---|
Huntingtown, Maryland | CRE9400ACL | F1 | F1 error keeps sounding off | Awaiting receipt of timer | Vienna, West Virginia | cre9400acl | N/A | not energizing the oven heating element | Repaired | West Hazleton, Pennsylvania | CRE9600ACL | F-5 | Oven will not get to pre-set temperature/ shuts off & sets F-5 trouble code. | Repaired | West Hazleton, Pennsylvania | CRE9600ACL | F-5 | Oven will not get to pre-set temperature/ shuts off & sets F-5 trouble code. | Repaired | north platte, Nebraska | cre9400acl | none | no self clean and no broiler. clock button and timer button occasionally stick | Repaired | Manchester, Massachusetts | CRE9400ACL | None | Oven temp only goes to about 100deg in Broil or bake mode
Please let me know if you have timers in stock or I need to send it back.
Thanks | Repaired | Lehi, Utah | CRE9400ACW | None | Oven heats 100 to 200 deg F below the set temp. Temp sensor has a resistance of 1028 ohms.
Note: I plan on sending in my timer later as a core. | Replaced with reconditioned timer | overland park, Kansas | cre9600acL | f1 | It is diificult to set the clock. Also the f1 alarm goes off repeatedly. Oven temperature is not accurate. | Awaiting receipt of timer | FLORENCE, Alabama | cre9400acl | N/A | after a power surge, does not illuminate | Awaiting receipt of timer | fort worth, Texas | cre9600acl | none | oven set 450 reads 350 | Awaiting receipt of timer | chattanooga, Tennessee | cre8600acw | N/A | will not stay on | Awaiting receipt of timer | cambridge, Ohio | cre9800acb | N/A | wont come on | Awaiting receipt of timer | Fremont, Nebraska | CRE9600ACW | NA | Oven and Broil show temp but don't heat up at all. Both heating elements have been tested and are fine. | Repaired | BARK RIVER, Michigan | CRE8600ACL | TEMPERATURE OFF--VER | OVEN WILL NOT HEAT PROPERLY---IS 150 DEGREES LOW | Repaired | Boise, Idaho | CRE8600ACL | n/a | | Repaired | Thornton, Colorado | CRE9600ACL | None | Oven doesn't heat above 150 degrees but indicates higher. Or goes to full heat but indicates lower. | Awaiting receipt of timer | fort worth, Texas | cre9600acl | f7 | oven temp lower set 300 and inside it reads 200 | Awaiting receipt of timer | Horn Lake, Mississippi | cre9600acl | f1 | oven will not turn on | Awaiting receipt of timer | Franklin Pa., Pennsylvania | cre9600acw | none | Will only heat oven to about 250 degrees | Repaired | Washington, North Carolina | CRE8600ACW | N/A | 8o degree bias in oven set. | Awaiting receipt of timer |
|