CALGARY, Alberta | L9875VRV | N/A | temperature is difficult to set, temperature kept rising. | Repaired |
Saskatoon, Saskatchewan | | F7 and F3 | I have 2 of these controllers. One throws an F1 code and the one I am sending sends an F7 code. So I know the F7 code is not the touch panel as the touch panel works fine with the one with the F1 code. The one with the F1 code I can use for now as It only happens after not being used for about 15 minutes so I just turn the breaker off. | Awaiting receipt of timer |
Smithers, British Columbia | | F1 | Random Fault code F1 displays in conjunction with beeping.
No functions of the Oven are affected. Fault code display & beeping can be cleared with cancel button or power down. Recurrence of fault code F1 happens @ random intervals (days, hours, etc.) | Awaiting receipt of timer |
Victoria, British Columbia | W131 B-C | N/A | Oven not warming, bake and broil elements and temp probe tested normal.
Removed control panel, can send it for repair if no others ( new or reconditioned ) available. | Repaired |
edmonton, Alberta | | N/A | the temp sensor when meterd out works but the control board dosnt read it properly. heat only comes on when set above 450f | Repaired |
Plano, Texas | W131W | F5 | Oven turns on. Attempts to reach desired temperature. 30 seconds later F5 Error Code | Awaiting receipt of timer |
Calgary, Alberta | L9875VRV | N/A | Thank you in advance for attending to my oven timer. As discussed with Howard, oven is not heating up to set temperature. Time and temperature display appear to be working properly. However, when we set the oven to 350, oven starts as normal during preheat and bake element turns red but even when display shows 350 reached, temperature inside the oven is not 350 at all (about 170 when we tested a few times). Also, the display shows the temperature starting around 200 when we start the oven and going up to the set temperature of 350, but the tested temperature is not 350 inside. (For example, my wife would bake muffins for the kids, and the muffins would stay white and not completely cooked at the set temperature of 350 even when she leaves them in the oven longer) | Repaired |
calgary, Alberta | cwe9000bdb | F5 | Broiler comes on
F5 Code | Repaired |
Cote Saint-Luc, Quebec | CWE9000BDB | Totally blank | Went blank during operation. Fusses didn't trip. | Awaiting receipt of timer |
Lyn, Ontario | CWE9000BDB | N/A | 1) Oven not warming up, on broil, bake and self clean
2) Oven light will not come on - suspect transformer
3) Timer does not work | Repaired |
Montreal-Ouest, Québec | CWE9000BDS | N/A | No digits , the screen is dark , but oven still works and you can hear the bips when pressing a button. | Awaiting receipt of timer |
Narol, Manitoba | | F1 | Timer F1 errors randomly. | Repaired |
Discovery Bay, California | | N/A | Timer is giving a F-1 code | Awaiting receipt of timer |
Kamloops, British Columbia | Wall Oven Model: W131B-C | F1 | Random Fault code F1 displays in conjunction with beeping.
No functions of the Oven are affected. Fault code display & beeping can be cleared with cancel button or power down. Recurrence of fault code F1 happens @ random intervals (days, hours, etc.) | Repaired |
warren, Michigan | 9875vrv | none | technician cam out and looked at oven and said your mother board is fried and he said its no longer avaliable | Awaiting receipt of timer |
BIBLE HILL, Nova Scotia | CWE9000BDB | N/A | oven not heating | Replaced with reconditioned timer |
TORBAY, Newfoundland and Labrador | CWE9000 | f1 | oven does not work/f1 shows on screen with steady beeps
NOTE: Sticker on wall oven timer reads as follows:
ERC-4740-MC PX/ 100-540-10 /CN: 7601P225-60
SN: 541 SET PT +/- 3% 173/564/917 'F | Awaiting receipt of timer |
REDFORD MI. 48240-0232, Michigan | W131W | N/A | NOT HOLDING THE TEMP. | Replaced with reconditioned timer |