7601P23160 Jenn-Air/Maytag Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Jenn-Air/Maytag timer model # 7601P23160 |
![Jenn Air ERCs and Jenn Air stove clocks and timers]() ![Maytag ERCs and Maytag stove clocks and timers]() |
Manufacturer : |
Jenn-Air/Maytag |
| Part Number : |
7601P23160 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Jenn-Air/Maytag 7601P23160 timer?
Click here:
We can repair or replace your faulty 7601P23160 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Jenn-Air/Maytag Part Number 7601P23160| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Calgary, Alberta | L9875VVV | F2 | If you try a bake or broil function, the broiler element is on solid, then you get the F2 error code. | Repaired | | Toronto, Ontario | W131W-C | F5 during preheat ba | error F5 upon preheat using bake or broil
Issue was more intermittent and became more frequent.
Sometimes using broil to preheat and then stiching to bake was helpful. Not it does it on either setting. | Repaired | | Etobicoke, Ontario | W131W-C | no code, just blank | not working at all | Repaired | | Luskville, Quebec | W131bc | F5 | Intermittent problem increasing in frequency. Oven will not start. Sometimes multiple efforts to start it - helps. | Awaiting receipt of timer | | Arnes, Manitoba | CWE9000CDE | dim | Display is very dim | Repaired | | Rockland, Ontario | CWE9000CDE | F5 | Oven does not start heating, it just beeps. After many tries it starts heating. If you do not have a timer in stock I could semd you mine to refurbished however I am ot sure I know hiw to remove it...? Do you have instructions? | Repaired | | Chilliwack, British Columbia | L9875XVB | F5 | F5 | Awaiting receipt of timer | | Georgetown, Ontario | W131B-C | 5 | oven starts to heat, then kicks out,, was intermittent then gave out. | Repaired | | Middle Sackville, Nova Scotia | CWE9000 | F3 and F5 | Intermittent F3, almost every time oven is used. Seems to be worse at higher temperatures. I replaced the oven temperature sensor and checked wiring.Also seeing intermittent F5 errors, less often than F3. | Repaired | | Winnipeg, Manitoba | L9875XVB | F2 | The stove when activated does not seem to turn off the Broil and then sets off the smoke alarm in the home9when bake temperature set to 350F or higher | Repaired | | Branchton, Ontario | W131B-C | None | Bake function will sometimes work and sometimes not. Suspected internal bake relay issue | Awaiting receipt of timer | | Neebing, Ontario | CWE9000CDE | F5 | Oven would flash an F5 error code and beep within a couple of minutes of starting to heat up. Pressing cancel ended the error alarm. It had done this a couple of times about 6 months prior, and at the time switching the breaker off for about 20 minutes would solve the problem. That no longer works, and the oven does not heat up at all anymore, only displays the F5 code shortly after selecting a bake temperature. | Repaired | | Huntingdon, Quebec | CWE9000BCB | N/A | The electronic clock is showing a F3 error code. | Awaiting receipt of timer | | Vanscoy, Saskatchewan | CWE9000DDB | N/A | CLOCK IS COMPLETELY DEAD. MADE A POPPING SOUND AND WENT BLANK. | Awaiting receipt of timer | | king city, Ontario | CWE9000DDB | N/A | bake temperature takes extreme long time , does not get over 165 degrees after 45 minutes on. | Repaired | | Sarnia, Ontario | | F2 | Temperature control does not work. | Awaiting receipt of timer | | Lansdowne, Ontario | W131 | None Shown | There was a power outage in our area. When the power went back on, the unit wouldn't work regardless od the button pushed. Prior to that, the LCD display flickered somewhat, and had been doing that for months. | Repaired | | Smithers, British Columbia | CWE9000BDB | F2 | HOWARD QUOTED $89.00 TO REPAIR TIMER.
F2 CODE - OVEN SENSOR IS NEW | Timer inspected, no repairs necessary | | Calgary, Alberta | W131W-C | F2 | When in "Bake" mode, sometimes the broiler element will come on, and stay on, until the oven overheats and the F2 code is displayed. Have checked the resistance in the heat sensor, and it is what Howard Simons has said it should be when the oven is cold. Have placed an oven thermometer in the oven, which indicates the oven temperature is correct when in bake mode (and the broiler element doesn't come on and overheat the oven). When the F2 code is displayed, the oven temperature is around 500F and going up. In such case, pressing cancel usually turns the oven off. | Repaired |
|
