7601P42860 Magic Chef Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Magic Chef timer model # 7601P42860 |
|
Manufacturer : |
Magic Chef |
Part Number : |
7601P42860 |
Appliance Type : |
Range/Stove/Oven |
Color : |
|
Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Magic Chef 7601P42860 timer? Click here: We can repair or replace your faulty 7601P42860 timer. |
|
Recent Service Requests for Magic Chef Part Number 7601P42860City | Model Number | Failure Code | Problem Description | Resolution |
---|
Ottawa, Ontario | Maytag | N/A | Intermittent led on the control. Crack in the cover. | Repaired | Winnipeg, Manitoba | 6498XVS | F3 and F5 error code | Hi,
The oven heats up to a point of about 425, but it will not hold the heat and then either gives the F3 or F5 error. The clock is also intermittent in its display, sometimes it shows other times it will not show unless you hit one of the function buttons | Beyond Repair | Vancouver, British Columbia | 6498XVS | N/A | 1. Oven temperature fluctuates
2. Display is not functional
3. Oven light works intermittently | Beyond Repair | Deport, Texas | 6498vvv | f3 | At first oven would start and reach temp and then shut off with code f3. However currently oven want start and code f3 shows at start. Oven sensor has been replaced. | Awaiting receipt of timer | VANCOUVER, British Columbia | 6498XVS | none. | Digital read out Intermittent on & off for a time but now completely blank.
All capacitors appear fine.
Burn mark inside LCD upper left.
No error codes. | Awaiting receipt of timer | veneta, Oregon | 6498XVS | N/A | Display fades out sometimes pressing face of unit brings it back. button on face cracked. Would like prices for repair service as well as replacement units | Awaiting receipt of timer | Redondo Beach, California | 6498VVV | None | Oven controls were working fine until intermittently the oven would not pre-heat, then ultimately would not light although igniter was glowing. In the process of removing the oven igniter, I cut power to the range via circuit breaker. After restoring power, the control panel and burner electronic ignition were both dead. | Timer inspected, no repairs necessary | Torrance, California | 6498VVV | N/A | Beeps, but no status display. Also does not appear to activate oven.
One of the zener diodes is melted, other resistors may not be in working order.
Was working fine until we switched off the mains to do maintenance in other parts of the house. Upon power restoration, the timer fails to display or operate the oven. | Repaired | Woodbridge, Ontario | 6498xvs | F-5 | When oven is turned on, it starts the fan & allows you to select the function, after about 45 seconds a F-5 error code is displayed, | Repaired | veneta, Oregon | 6498VVV | F7 | display dims blanks out intermitent F7 | Awaiting receipt of timer | Union, New Jersey | Maytag 6498XVS | None | All of the controls on the timer seem to work however in order to see display the cover has to be pressed on pretty hard in order to see the numbers. | Repaired |
|