82648 Dacor Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Dacor timer model # 82648 |
![Dacor ERCs and Dacor stove clocks and timers]() |
Manufacturer : |
Dacor |
| Part Number : |
82648 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Dacor 82648 timer?
Click here:
We can repair or replace your faulty 82648 timer. |
![Request Appliance Timer Service]() |
Electronic Range/Oven Timer timer Part Number 82648 is used in the following appliances |
Recent Service Requests for Dacor Part Number 82648| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Toronto, Ontario | W305 | No power to eleme ts | Timer temp set has been wonky last 6 months, then today no power to elements at all on any selected operating position. This is your timer sent to me Nov 19, 2014 | Repaired | | Porter Ranch, California | W305B | None | We had a power outage which seems to have cooked the control panel. It no longer allows temp, timer, etc to be set. | Repaired | | WARREN, New Jersey | w305b | none/dim readout | Dim time/temp read-out. Two button posts broken off inside holes, I will mark with tape to indicate. | Repaired | | WARREN, New Jersey | w305b | none/dim readout/wil | Bake element will not activate. Element has been tested and is working. Broil works fine. Unit has voltage into timer but not out to bake element. | Repaired | | San francisco, California | W305 | N/A | Can’t set anything but clock. When I try and set temperature it reverts back to clock
Also white pegs ( used for setting timer, cook time, self clean, etc. have broken off | Repaired | | Encinitas, California | W305W | N/A | Displayed temperature changes erratically when temperature knob is turned, making it nearly impossible to set the desired temperature | Repaired | | Encinitas, California | W305W | N/A | Displayed temperature changes erratically when temperature knob is turned, making it nearly impossible to set the desired temperature | Repaired | | Los Angeles, California | Dacor W305 | N/A | Oven is controlled by a digital panel that is blinking. We can't heat or use the oven in any way. | Awaiting receipt of timer | | Solana Beach, California | W305 | N/A | Everything works except the knob to set the temp (and time) does not go up and down linearly when turned. It hops around, eventually landing on the correct temp (time) by trial and error. | Repaired | | Alexandria, Virginia | W305 | SEO | When on broil or bake, oven heats to about 350 degrees and then SEO message appears and element is shut off. | Beyond Repair | | Los Gatos, California | W305 | N/A | Temperature control won't go past 100 degrees. | Repaired | | Oakville, Ontario | W305WC | no codes | Rotary switch causes digital readouts to jump numbers. Difficult to set Temp., Clock, Timer etc. | Repaired | | Los Angeles, California | Dacor W305 Black | N/A | Oven timer and temperature are erratic, jumping around temperature settings, unable to set the timer or the oven temp. | Awaiting receipt of timer | | LONG BEACH, California | W305W | don't know | The controller display went dark, following a blackout (power surge?) in my neighborhood. The heating elements don't work. Controller is non-responsive. | Repaired | | Cleveland, Ohio | W305B | N/A | Temperature knob does not work | Repaired | | Cleveland, Ohio | W305B | N/A | Temperature knob does not work | Repaired | | Seattle, Washington | w-305 | 8888 | Similar symptoms as Jamul in California -- a repair you did in January of 2010 -- he wrote,
During oven use clock display will commonly and randomly switch to the blinking, all red LEDs showing an "8888" configuration that is typical of power loss or interruption. The oven heating elements will be automatically switched off. No error code is displayed. The problem has been occurring with increasing frequency, such that oven is presently not usable.
Display may be reset by setting time, or pressing time and temp set buttons simultaneously, or resetting may require the circuit panel breaker to be clicked on and off first. Then oven will run for a while and the problem will likely reoccur.
Additional Observations:
- Problem only occurs when oven is in use. When display shows only time, the display never switches to the blinking configuration.
- We think the problem may be triggered when the oven temperature reaches set-point. Normally there are several bell chimes to signal oven temp. has been reached, but sometimes (but not at all times) we hear only one chime and look at the display and it is flashing.
- Otherwise, all oven functions appear to work properly, door gasket is tight, cooling fan comes on normally, convection fan works.
- Problem occurs using a variety of element configurations (broil, bake, preheat), but I do not recall it happening during cleaning. | Timer inspected, no repairs necessary | | Chicago, Illinois | W305 | N/A | The potentiometer "Pot" is shot and has carbon tracing that makes it goes wild when any adjustment to time / temp are made.
Do you repair / replace / exchange these Borg B-408 ECR units?
Can send pics to you.
Need repair for Holiday baking duty... | Awaiting receipt of timer | | Los Altos Hills, California | | N/A | timer adjust knob broken
time / temp "jumps". | Repaired | | Sausalito, California | W305 | no failure, LED very | LED very dim | Awaiting receipt of timer |
|
