82810 Dacor Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for Dacor timer model # 82810 |
|
Manufacturer : |
Dacor |
Part Number : |
82810 |
Appliance Type : |
Range (Stove, Oven) |
Color : |
|
Description : |
Switch pcb assembly - Discontinued by the manufacturer |
|
Do you have a failed Dacor 82810 timer? Click here: We can repair or replace your faulty 82810 timer. |
|
Switch pcb assembly - Discontinued by the manufacturer timer Part Number 82810 is used in the following appliances |
Recent Service Requests for Dacor Part Number 82810City | Model Number | Failure Code | Problem Description | Resolution |
---|
arlington, Washington | | N/A | rotary dial light stays on | Awaiting receipt of timer | havertown, Pennsylvania | cpo130W | f1 | Oven fan on and beeps tried to push reset did not work. | Beyond Repair | Sussex, Wisconsin | Cpo130 | F1 | Shaft broke 5 pin connector loose | Repaired | Repentigny, Québec | | N/A | shaft is broken | Awaiting receipt of timer | Bremerton, Washington | | None | The temperature using the reostat on the circut board (82810) does not work. I am sending the ERC (82874) so the complete unit can be checked. | Beyond Repair | charleston, West Virginia | CP0130 | N/A | The service man thinks the defective part is the rotary switch. A light on the selector knob stays lit and the oven will not cook at the set temp. | Awaiting receipt of timer | Las Vegas, Nevada | CP0130W | LCD LIGHT STAY'S ON | LCD LIGHT STAY ON EVEN IN OFF POSITION | Awaiting receipt of timer | Las Vegas, Nevada | CP0130W | LCD LIGHT STAY'S ON | LCD LIGHT STAY ON EVEN IN OFF POSITION | Awaiting receipt of timer | Livonia, Michigan | CPO 130 | No Failure Code | The oven will not start unless the Memory button is pushed. When the oven does start, it starts into the preheat cycle for a short interval and then shuts down.
The Bake and Broil LEDs stay on all the time.
I am not sure in one or both boards need repair. | Beyond Repair | Charleroi, Pennsylvania | Dacor CPO130w | Didn't notice any | The selector switch doesn't allow changing modes of operation. It also won't allow the oven to be turned off. We had to cut the power at the breaker box. The knob rotates but nothing changes. | Awaiting receipt of timer |
|