| Quincy, Missouri | | N/A | Water spilled over onto control board and smoked. Doesn’t work | Awaiting receipt of timer |
| TORRANCE, California | KGST307HBS4 | "PROBE" LIGHT ON | After 19 years with no issues, the temperature "probe" light turned on, but the "probe" is not insert in the outlet. I've tried everything to reset it, but to no avail. Can you repair or do you have a NEW one to replace mine? Thanks! | Awaiting receipt of timer |
| Richmond, British Columbia | | N/A | I need a 9781980 control board | Awaiting receipt of timer |
| Whitby, Ontario | YKGST307HB4 | N/A | I have no backing power the backing relay is all black burned out no power at the igniter,if you can fix it I can send it but a reconditioned one would be a faster option.thank you | Repaired |
| whitby, Ontario | YKGST307H4B | N/A | All functions work except the Backing mode,the bake relay is burned out(Black),please check the complete board. | Repaired |
| Revelstoke, British Columbia | KGRT607 | unknown | It is as if the buttons are being pressed on their own. Bake will not turn on. Convection only will turn on and then will not stay on as buttons are being pressed on their own. | Awaiting receipt of timer |
| London, Ontario | YKESC307HS6 | N/A | COOKTOP WORKS, OVEN CONTROL IS FUNCTIONING BUT INCREASE IN TEMP WHEN IN BAKE, BROIL MODE.
SERVICE TECH BELIEVES DOUBLE RELAY IS NOT RESPONDING. | Repaired |
| Phoenix, Arizona | KERC607HBS4 | None | Lower hidden bake element fried. Replaced element but also discovered electronic timer board output voltage for element not present. Board relay contacts for element appear burned. Upper bake elements (bake and broil) work fine. | Repaired |
| Indianapolis, Indiana | | N/A | Not properly heating | Awaiting receipt of timer |
| Thetis Island, British Columbia | ykgrt607hb6 | N/A | no responce on touch pad | Awaiting receipt of timer |
| Hillsboro, Wisconsin | KERC607HB T4 | N/A | My Control Board was fryed by a repair technition-it can't be repaired I need a replacement. | Replaced with reconditioned timer |
| Eagle River, Wisconsin | Kitchen Aid Superba | N/A | I believe the unit failed after a lightning storm, it shows a part that appears to be damages (burnt) | Replaced with reconditioned timer |
| Pickering, Ontario | YKESC307HM4 | N/A | Oven not heating up, checked the elements and the bake element was blown. Replaced the bake element, now the bake element and the convection element do not work. Broil elements work fine. | Repaired |
| London, Ontario | ykgrt607ht3 | N/A | existing board will not accept all numbers entered on keypad with some erratic results. Have tried replacement console touch pad with no improvement. Started to fail after an over self-clean cycle. | Awaiting receipt of timer |
| Rogers City, Michigan | KGST307 HBT4 | no power at all | On arrival I found a mouse stuck to board. Not sure it caused the failure, could not get any power through board no display but I had power to board. | Repaired |
| CATAULA, Georgia | KESC307HBS5 | N/A | SERVICE TEX SAID I NEED THE PANLE PART NUMBER 9781980 | Replaced with reconditioned timer |
| Saint-Alphonse Rodriguez, Québec | YKGST307HS5 | NO FAILURE CODE | CONVECTION FAN INOP, I BYPASS IT AND THE FAN TURN, I HAVE NO POWER FROM THE BOARD. SOMETIMES THE OVEN FAIL TO IGNITE, I DO A RESET AND THE OVEN RAISE IN TEMPERATURE. | Replaced with reconditioned timer |
| Richmond Hill, Ontario | Ykesc307hs4 | N/A | oven elements not working | Awaiting receipt of timer |
| SUDBURY, Ontario | YKESC307HW8 | N/A | DISPLAY LIGHTS DO NOT WORK BUT ALL FEATURES WORK ON THE RANGE. TECHNICIAN SAID P/N 9781980 IS FAULTY | Awaiting receipt of timer |
| VALLEYFIELD, Québec | | N/A | do not work | Replaced with reconditioned timer |
