| Blenheim, Ontario | GRSR3920ZBB-3 | F-1 | When oven is on timer comes up with an F-1 fault code and oven continues to heat up | Repaired |
| Blenheim, Ontario | GRSR3920ZBB-3 | warranty repair | We had the F-1 code repaired and when the timer was returned the clock and the start time button are non functioning. They had worked previously, the buttons seem to have no stability. | Beyond Repair |
| Waldheim, Saskatchewan | 12591-1 | none - place to read | No heat to oven element (no voltage off timer side when oven on). Broiler element works. Temperature sensoor fine, reads 1080 ohms.
Bake element fine. Likely the oven relay shot.
Other number on timer 199-01170-00 | Repaired |
| Sooke, British Columbia | GRSR3920ZSS-1 | No Code | Turns oven off periodically | Awaiting receipt of timer |
| Caledonia, Nova Scotia | | N/A | Neither oven element turns on, says it is preheating but elements can still be touched after 10min. We had intermittent power outages all weekend so I'm guessing we fried the control panel. | Awaiting receipt of timer |
| Ottawa, Ontario | GRSR3920ZWW-3 | N/A | Up button is broken | Awaiting receipt of timer |
| Georgetown, Ontario | GRSR3920Zww-2 | N/A | Oven heats up normally and maintains temperature for some time, then shuts off randomly. Clock shows 12:38 after every shut-off.
I can turn oven back on immediately and it will go back to normal operating temp. Sometimes it will finish the bake/roast cycle; sometimes it will cut out again.
Same failures are described in your "Resolution web page". | Beyond Repair |
| Etobicoke, Ontario | GRSR3940ZWW-2 | n/a | Oven starts to heat up.
Oven stops heating before set temperature is reached.
(I was also checking temp. with a mechanical in-oven thermometer)
Oven never reaches set temperature - just continues to cool off - and element doesn't come on again - relay seems to stay open.
ALSO: If you have a replacement faceplate, I would like to purchase that also - the existing one is cracked. | Repaired |
| Windsor, Ontario | GRSR3925ZSS-1 | F3 | Was an interrmittant problem but seems to have escalated to where I must unplug Range to reset fault, but when I try to turn on broil or bake the F3 fault returns.
Phil(519-979-9755) | Repaired |
| Minden, Ontario | | N/A | No display | Beyond Repair |
| Mill Bay, British Columbia | GRSR3920ZCC-1 | ?? | Oven stopped working, Elements tested and both upper and lower appear fine. Stove top continues to function. | Repaired |
| Mundleville, New Brunswick | | F1 & F3 | F1 and F3 error...I checked the temp probe and probe is fine 1050ohms. I need a refurbished replacement | Awaiting receipt of timer |
| Calgary, Alberta | GRSR3925ZSS-1 | N/A | - Surface elements work fine.
- Verified 120V to timer at N/L2 terminals and also at N/L1
- Screen on timer is blank. The time is not shown and nothing appears when buttons are pressed.
- Buttons do not appear to turn on the oven element.
- None of the little lights on the timer panel come on (e.g. Bake, broil, timer, etc.) | Repaired |
| Shakespeare, Ontario | GRSR3920ZWW-4 | F-4 | F-4 code. Replaced temperature sensor. No change.
Please diagnose and repair or replace with reconditioned. | Repaired |
| Ucluelet, British Columbia | GRSR3955ZWW-1 | F1 & F3 | F1 THEN STOVE COMES ON AGAIN
F3 STAYS OFF FOR SOMETIMES HOURS THEN BACK TO NORMAL | Repaired |
| Richmond Hill, Ontario | grsf3201zww-5 | N/A | LED display not functional, control buttons not functional | Awaiting receipt of timer |
| West Vancouver, British Columbia | grsr3920zss-1 | f1 | F1 code. Oven does not work. | Repaired |
| Bladworth, Saskatchewan | GRSR3920ZWW-4 | F3 | Oven will not turn on , tried replacing temp sensor , still throughing F3 code | Replaced with reconditioned timer |
| Almonte, Ontario | 12791-2 | N/A | Looks like the relay has burnt, but am happy to just get a reconditioned part. other numbers on the Robertshaw PCB are 100-01176-00, 040448592 JG1, 585/930F/ELEC | Replaced with reconditioned timer |
| Bolton, Ontario | GRSR3925ZSS-1 | F1 | The timer beeps and flashes F1 every half hour or so. Powering down and repowering did not clear the alarm. | Repaired |
