ERC14500RP General Electric/Kenmore Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for General Electric/Kenmore timer model # ERC14500RP |
![General Electric (GE) ERCs and General Electric (GE) stove clocks and timers]() ![Kenmore ERCs and Kenmore stove clocks and timers]() |
Manufacturer : |
General Electric/Kenmore |
| Part Number : |
ERC14500RP |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed General Electric/Kenmore ERC14500RP timer?
Click here:
We can repair or replace your faulty ERC14500RP timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for General Electric/Kenmore Part Number ERC14500RP| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Richardson, Texas | JSP26G P2AD | None | Oven heating element and broiler element stopped working. Replacement oven heating element does not work. | Repaired | | Brampton, Ontario | JCSP31GP1WH | no code | Power surge in house, timer is not displaying | Beyond Repair | | Bolingbrook, Illinois | JKP13GOP2BG | Unknow | when turning the oven on it goes 5-10 seconds and then shuts its self off. | Repaired | | Aurora, Maine | unknown unreadable | F1 | This gas wall oven uses the above electronic control unit. It controls oven timing, clock, temperature settings, oven or broiler...multifunctional. It gives the F1 error code. The timer can be shut off then comes right back on in a10 or 15 seconds. | Awaiting receipt of timer | | Hauppauge, New York | Jkp27wop3wg | F1 | After usong the oven f1 comes on | Repaired | | Jackson, Georgia | 27 inch | F1 | when power is applied, get a F1 code | Repaired | | Kagawong, Ontario | jcsp31gp2wh | F1 | Oven will turn on and heat but the Fi error will appear and continuous beep occurs | Repaired | | Huntsville, Alabama | JKP13GOP4BG | none | Oven will not achieve full temperature. Oven shuts off too soon. Temperature probe has already been replaced. | Repaired | | Huntsville, Alabama | JKP13GOP4BG | none | Oven will not achieve full temperature. Oven shuts off too soon. Temperature probe has already been replaced. | Repaired | | Cincinnati, Ohio | JKP26GOP4BG | F1 | Last 5 Years Oven Displays F1 Code shortly after applying power. We have been switching the main off and on for 5 Years. We can get the oven to operate by quickly pushing random keys on the pad and it will eventually go to heat mode. I talked to one of your techs on the phone and did the test he recommended. I applied power and set the clock then disconnected the key pad ribbon. It held time for about 30 seconds and as soon as the minute digit changed, the F1 Code returned. The Tech said this indicates the ERC has failed. | Beyond Repair | | Brighton, Michigan | J SP26 GOP 4AD | Bad Transistor | Oven and Broiler will not turn on. I do not hear the timer relays turning on. | Repaired | | mayfield, Kentucky | jkp1360p1bg | e1 | no heat | Repaired | | San Rafael, California | JKP13GP1BG | None | Oven does not reach set BAKE temperature. Display can be set, but regardless of the BAKE temperature setting - never reaches beyond warm. I had replaced the probe in the unit with a service technician. No change. He said: you need a new ERC. The panel displays and runs up thru the temperatures as if it is heating up to bake. It ticks up thru all the numbers, and beeps when it stops at the set temp. Display works fine and accepts input. Shows correct time. The Broiler works. No error codes ever. I have had power outages but the thing always came back on. | Repaired | | OLD LYME, Connecticut | JKP13GT1BB | F1 | FLASHING F1 | Beyond Repair | | glen ellyn, Illinois | JGSP31 | F-1 | f-1 code even after unplugging | Repaired | | Point Reyes Station, California | JRP15WP1WG | n/a | Neutral problem caused surge. Oven (and many other appliances) stopped working. | Awaiting receipt of timer | | Bowie, Maryland | 9114832993 | F-1 | F-1 | Beyond Repair | | Fayetteville, Tennessee | J KP27W0P3WG | F-1 | GE electric double wall oven: Model no J KP27W0P3WG serial no: AL621076Q
The oven is making a "dinging" noise every time the oven has power. There is an F1 fault code although a couple of times it has shown F2. We tried to figure this out on our own and even tried running the oven through a cleaning cycle. It dinged the whole time but the door locked, the oven heated, and it went through an entire cleaning cycle. Thats all the info we have been able to see. | Repaired | | Bowie, Maryland | 9114832993 | F-1 | F-1 | Beyond Repair | | Jonesboro Ga., Georgia | jkp27wop3wg | F1 | F1 code comes up when power is applied to the oven. | Beyond Repair |
|
