| Pine City, New York | jkp16gov1bb | no code | when put into any heating mode it starts to heat then shuts down and goes back to time of day if I try again it won't even go into the heat mode, just stays on the time of day. I have to turn the power off to the oven then this cycle starts again | Awaiting receipt of timer |
| Pine City, New York | jkp16gov1bb | no code | oven comes on then shuts down after 30 seconds and will not turn back on | Awaiting receipt of timer |
| Granby, Quebec | Jckp16gp-2 | F2 | The oven shut off | Awaiting receipt of timer |
| BURNABY, British Columbia | | None | No heat from bake/broil/convection elements (convection fan will come on as appropriate). L1 power to elements reads 120V as appropriate. There is 120V L2 in to the control board, but no power out to elements when turned on. | Awaiting receipt of timer |
| Molino, Florida | JTP17wot1ww | Oven comes on shuts | Oven comes on for approximately 30 seconds then shuts down. | Repaired |
| Quebec, Quebec | JCKP16GP-4 | F1 | When oven is shut off F1 Code appears and oven beeps. When oven is on will heat up partially (to about 280F) then oven shuts off and F1 code re-appears | Repaired |
| Panama City, Florida | Jkp17w011ww | N/A | Timer starts preheat then shuts off after 1 minute | Awaiting receipt of timer |
| Montcalm, Quebec | JCTP16GV2BB | F3 | F3 error code was intermittent for the past year, but now is always on. Can't use oven. I have checked resistance of temperature sensor, and the sensor circuit and both are at 1090 Ohms, so should be OK.
My limit switch has also recently failed, so I have temporarily replaced it with a mechanical switch to turn on the cooling fan when using the oven. Switch part from GE is: WB24K5126. Might you have this in stock too. Otherwise I can get it from GE. Thanks | Awaiting receipt of timer |
| VILLAGE OF PALMETTO BAY, Florida | JKP16G0V1BB | none (blank) | display went blank after power surge during Hurricane Irma | Awaiting receipt of timer |
| Granite Falls, Washington | 9114703592 | N/A | I just want the part | Awaiting receipt of timer |
| Montreal, Quebec | JCKP16GS-1 | f2/f3/f8 | The oven is doing mostly f3 and sometimes f2 and f8 error code intermittently. The temp sensor is okay(1100 ohms at room temp) | Repaired |
| waterbury, Connecticut | JKP17WV1WW | F1 | When oven is shut off F1 Code appears and oven beeps. no problems with self clean or baking | Awaiting receipt of timer |
| Garden city, Idaho | Jtp16gt | None | Oven simply turns off without heat. | Repaired |
| Garden city, Idaho | | F1 | Oven shuts down | Repaired |
| Hamilton, New Jersey | KP16GOT2BB | NO CODE | Turn it on set temperature fan comes on and after 20 to 30 seconds everything gets cancelled. I already check the elements and the sensor with a multimeter and all of them have continuity. I called here and explain the problem and someone toll me was the control board. | Awaiting receipt of timer |
| New Westminster, British Columbia | JCKP17WP-RP | F1 | When oven is shut off F1 Code appears and oven beeps. When oven is on will heat up partially (to about 280F) then oven shuts off and F1 code re-appears. | Repaired |
| Gresham, Oregon | | F-1 | Unit just went out. It controls all features on the oven.
Other numbers on this unit are: RP: 346532 and GE: WB27K5046
SN: 2309 and LBL 18-167-18. | Awaiting receipt of timer |
