| Winnipeg, Manitoba | JCKP16GP-2 | F2 and F3 | Our GE Profile oven started displaying F2 and/or F3 error codes when running and when not running. When we press OFF the code clears but then usually comes back within hours or next day. We had to turn off the power to the oven to stop the codes and beeping. Repairman already checked the temp probe and it tested okay for resistance. Elements and convection fan all seem to work. I was told the control board is the problem (part number taken from online part manual). | Repaired |
| Hammonds Plains, Nova Scotia | JCKP17WS-1 | F3 | F3 ERROR CODE. A NEW OVEN SENSOR WAS PUT BUT PROBLEM PERSIST | Awaiting receipt of timer |
| Hammonds plains, Nova Scotia | Jckp17ws-1 | F3 | F3 error. Oven sensor was changed. Problem is from timer. | Awaiting receipt of timer |
| Montreal, Quebec | VCKP17WP | N/A | The commands of Clock, Light and others go well but there is no heat for Bake, Convection and Broil | Awaiting receipt of timer |
| Lancaster, Ontario | JCKP16GS-1 | F2, F3, F6 | Oven shuts off intermittently with various F codes. Sometimes, it comes back on if we shut the breaker and turn it back on. Other times we need to keep the power shut off for up to 12 hours or more before the oven will turn back on. When oven is on, it cooks fine. But the intermittent on and off makes it difficult to cook. | Repaired |
| Langley, British Columbia | Cssw2780p-2 | N/A | Oven starts to heat up but after a few minuets will turn off when it indicates 100 deg. | Repaired |
| Burnaby, British Columbia | GE Profile Oven JCKP16GP-4 | F1 | F1 Error and beeping. | Repaired |
| Kamloops, British Columbia | JCKP17WP4 | F1 | F1 Error code, Pulled panel disconnected ribbon cable from key pad, restored power, code comes back, it is my understanding that this means the Board/timer is no good. Please include pricing options for New/Reconditioned/Repair and Replace options ? Thanks so much! | Awaiting receipt of timer |
| Mississauaga, Ontario | JCKP16GP-2 | F3 | Intermittent F3 code. Temp sensor replaced and tests ok. | Repaired |
| Burnaby, British Columbia | JCKP16GS-1 | F1, F2, F3 | QTY 1 - resistor is blown, F1 when turning on, F2/ F3 when temperature exceeds 300 - 350 F, intermittent F1 while oven heats up, convection fan not working, convection element works intermittently, | Replaced with reconditioned timer |
| Lindsay, Ontario | jckp16gs-1 | F2, F3 | long time to heat up, oven would quit at random time and display f2, f3 code. Could be reset by turning off main power. Temp prob and elements test ok. | Repaired |
| Ottawa, Ontario | JCKP17WP-4 | F7 | the bake/broil/clean/roast functions have stopped working. | Awaiting receipt of timer |
| Gibsons, British Columbia | JCKP17WP-4 | N/A | Intermittent functionality. Sometimes will heat the oven and sometimes nothing. If it does start to work it will shut off after a few minutes as if the function was canceled. | Repaired |
| Cookstown, ON L0L 1L0, Ontario | JCP | repairman said defec | stove turns on then off, repair said inside element touch frame and believes shorted out timerr. if you turn stove on it cuts out
built in GC profile oven, repairman said timer gone, GC company gave part no and need it rebuilt,
as per telephone call to Howard requesting form to return part for repair
Thank you | Beyond Repair |
| Acton, Ontario | JCKP16GP-3 | N/A | Oven begins to heat up in all modes, then shuts down when temperature is above 100 F.
Serial No. ZH693383 | Beyond Repair |
| Duncan, British Columbia | CSS2780P-2 | N/A | Bake and Convection Cycles do not operate. If I can get the display for the bake setting I can adjust the temp setting but then it seems to time out....The clock display and timer seems to be ok. | Repaired |
| Gatineau, Québec | JCKP17WP-4 | 01 | ERROR 01 and not working | Awaiting receipt of timer |
