WB27K5103 General Electric Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # WB27K5103

Manufacturer :

General Electric

Part Number :

WB27K5103

Appliance Type :

Range (Stove, Oven)

Color :

Description :

Electronic clock control kit (part number WB27K5103 replaced with WB27T10324)

Do you have a failed General Electric WB27K5103 timer?
Click here:
We can repair or replace your faulty WB27K5103 timer.

City	Model Number	Failure Code	Problem Description	Resolution
Boston, Massachusetts	unknown	unknown	Oven starts to heat, gas turns on, then within a minute, oven turns off as if it's reached operating temp. Never gets over 100+ degrees F Please repair our unit due to uncertain lead placement on replacement units Call 1-617-699-4939 or 1-888-257-3882 for instructions if not repairable	Repaired
Parma, Ohio	jgrp17wep2wg	F1	Bought old stock oven that appears to have never been used based on oven interior and parts still in packaging. Concerned how this panel could be damaged if this unit was indeed never fired up. Please let me know if there is no problem with the time as the problem could lie elsewhere.	Repaired
MENTOR, Ohio	911.3042992	NONE	Face of timer starts out at 260 (when it should be 100) degrees when oven is cold, have to set temp setting of 550 degrees to get 350 degrees.	Repaired
MENTOR, Ohio	911.3042992	NONE	Face of timer starts out at 260 (when it should be 100) degrees when oven is cold, have to set temp setting of 550 degrees to get 350 degrees.	Repaired
Pensacola, Florida	JGRP16GET1BB	UNKNOWN	24" wall oven controller will not send "bake" or "broil" signal, when pressing the keypad, to the igniter. It just blinks. It may have shown an error code before failure, but my wife cannot remember which one.	Awaiting receipt of timer
Wayne, Michigan		none	Timer acts like it is working but ot will not send any electrical signals out at all.	Repaired